In fact, metal stamping parts can be divided into two categories according to different processes, namely the separation process and forming process. The purpose of the separation process is to separate the metal stamping parts from the sheet along a certain contour line and ensure the quality requirements of the separation section.
The purpose of the forming process is also obvious, that is, to make the sheet plastic deform without breaking, and to make the required shape and size of the workpiece. In actual production, many processes are often applied to a workpiece, including blanking, bending, shearing, deep drawing, bulging, spinning, straightening, etc.
With the standardization of mold base, mold base, and guide parts, as well as the development and development of simple mold, compound mold, multi-station progressive mold, and rapid mold change device, the preparation workload and preparation time in the production process of metal stamping parts have been effectively reduced and shortened, making it possible to apply advanced metal stamping parts technology suitable for mass production to small batch and multi-variety production.
However, when tens or hundreds of metal stamping parts are produced every minute, there are corresponding risk factors for completing such processes as material feeding, metal stamping parts, outgoing parts, and waste disposal in a short time, so the safe production of metal stamping parts is a very important issue.
As a processing method with high production efficiency and low material consumption, the metal stamping process is suitable for the production of large batches of parts, which is convenient for mechanization and automation and has high production efficiency. At the same time, the production of metal stamping can not only strive to achieve less waste and no waste production, but also make full use of leftover materials even in some cases, but all these are based on safe production.
Further reading: Process Characteristics of Metal Stamping Parts
Feng-Yu is a China custom metal stamping manufacturer that was founded in 1971, based on our mastery of precision hardware processing technology and nearly 50 years of experience. Hardware processing provides key components for many industrial equipment and products, such as processing hardware stamping parts, injection molding parts, automotive stamping parts, precision hardware stamping parts, medical devices stamping, and other products. Our company provides a one-stop service process from drawing receiving to sample delivery, with stable quality and commitment, please contact us.
Metal stamping parts are pieces of metal that are shaped by applying an intense force through a die. Metal blanks are inserted into dies and then pressed to create specific shapes. Commonly stamped items include car body panels, engine components, and household appliances.
No matter in terms of operation technology or safety, the metal stamping process should meet the corresponding requirements, starting from its technical measures. You should know that the so-called metal stamping is a process of deforming or breaking iron, aluminum, copper and other plates and dissimilar materials to a certain shape and size by using a punch and a mold.
According to the total deformation properties of materials, hardware processing processes are divided into two categories and five types of deformation in the stamping process.