Maintenance of metal stamping die

2022.09.13 | Technical Knowledge
Precision Metal Stamping Parts

Metal stamping parts processing is currently a widely used metal processing method, and metal stamping dies are the most important technological equipment in the process of metal stamping parts, which is related to the final product performance and quality of stamping parts. To prolong the service life and use the effect of metal stamping dies, it is necessary to do maintenance work on metal stamping dies.

Maintenance and maintenance methods of metal stamping parts molds

Before use, check whether the metal stamping parts processing mold is in good condition and whether the stamping materials used meet the requirements of the process drawings, to prevent the mold from being damaged due to the raw materials not meeting the requirements, and the metal stamping parts processing and production cannot be completed. During the use of the mold, the punch is prone to breakage, bending, and gnawing, and the punch sleeve is generally gnawed. Damaged punches and sleeves are generally replaced with parts of the same specification. After long-term use, the cutting edge needs to be sharpened, and the cutting edge surface needs to be demagnetized after grinding.

Check the looseness of each set of molds, check the screws, and fastening parts, and check whether the fastening parts are loose or damaged. If there is damage, you need to find parts of the same specification for replacement. Springs and other elastic parts are easily damaged during use, and usually break and deform, so they need to be carefully checked. Replace elastic parts such as damaged or failed springs (pay attention to the specifications and models of the springs)

After the metal stamping parts mold is used, the surface needs to be cleaned to remove oil, dust, and other sundries, to achieve a clean appearance, no rust, and no grease. For the maintenance and maintenance of metal stamping dies, operators need to pay attention at all times in their daily work, do a good job in detail, and do each maintenance work in place to avoid failures, to prolong its service life.


Feng-Yu is a China custom metal stamping manufacturer that was founded in 1971, based on our mastery of precision hardware processing technology and nearly 50 years of experience. Hardware processing provides key components for many industrial equipment and products, such as processing hardware stamping parts, injection molding parts, automotive stamping parts, precision hardware stamping parts, medical devices stamping, and other products. Our company provides a one-stop service process from drawing receiving to sample delivery, with stable quality and commitment, please contact us.

If you have any needs for stamping parts or are interested in our metal stamping services, welcome to contact us.