How to adjust the machine during the production of precision metal stamping parts is the first problem that a precision metal stamping terminal factory has to face, and it is also a skill that a precision metal stamping terminal factory needs to master. The following is a detailed description of how to adjust the machine for the production of precision metal stamping parts.
The adjustment method is: first turn the material thickness adjustment disc clockwise, and pull the material belt with one hand. If the material belt can be pulled, it needs to slowly rotate counterclockwise until the material can not be pulled, and then rotate counterclockwise for two hours. Then tighten the locking screw. If the material cannot be pulled, but the material thickness adjustment disc is relatively loose when it rotates clockwise or counterclockwise, you need to use your fingers to slowly rotate clockwise, but do not use strong force, and then rotate two small grids counterclockwise until it stops. Then tighten the locking screw. Fixing clip adjustment is the same.
After the material thickness of the moving clamp is adjusted, the flywheel of the punch press needs to be shaken clockwise to 90 degrees, and during this period, it is necessary to check whether the moving clamp has been in a clamped state. To adjust the material thickness of the fixed clip at 90 degrees, first turn on the main switch for clamping and loosening the feeding clip, place 1.5T material on the material thickness adjustment plate of the moving clip, hold the moving clip material block up without clipping the material, and then put the material Pass through the fixed clip, then turn off the main switch for clamping and releasing the feeding clip, and then adjust the thickness of the fixed clip material according to the method of adjusting the thickness of the moving clip material.
After the distance is adjusted, turn on the main switch for clamping and releasing the feeding clip, remove the material placed on the material thickness adjustment plate of the moving clip, and move the flywheel of the punch press away from the guide pin of the upper mold stripper plate When entering 2/3 of the floating pinhole of the lower die, adjust the feeding machine relaxation time.
When the straight section of the guide needle is about to leave the material belt when the punch is shaken through 180°, it is necessary to check whether the fixing clip is clamped at this time.
Further reading: The reason of precision influence of precision metal stamping parts
Feng-Yu is a China custom metal stamping manufacturer that was founded in 1971, based on our mastery of precision hardware processing technology and nearly 50 years of experience. Hardware processing provides key components for many industrial equipment and products, such as processing hardware stamping parts, injection molding parts, automotive stamping parts, precision hardware stamping parts, medical devices stamping, and other products. Our company provides a one-stop service process from drawing receiving to sample delivery, with stable quality and commitment, please contact us.